484 schrack dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. catalog 1308242 issued 3-03 specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. mechanical data termination: printed circuit terminals. enclosure: flux-tight (rt ii) plastic case or sealed (rt iii) cover. weight: .63 oz. (18 g) approximately. operate data must operate voltage: see coil data table. operate time (typical): 8 ms. release time (typical): 2 ms. bounce time (typical): n/o: 2 ms; n/c: 4 ms. switching rate: 6.000 ops./hr. max. at rated load. environmental data temperature range: operating: -40c to +70c. vibration (30-300 hz.): n/o: >10g; n/c: 2g. shock (destructive): 100g. features 1 form a (spst-no) or 1 form c (spdt). 8 and 12 amp models available with 3.5 or 5mm pin spacing. 16 amp models available with 5mm pin spacing. 4kv/8mm contact-to-coil. sockets available. contact data arrangements : 1 form a (spst-no) and 1 form c (spdt), single contact. material: silver-cadmium oxide or silver-nickel 0.15. expected mechanical life: 30 million operations. ratings: current: 8a 12a 16a voltage: 250vac 250vac 250vac power (breaking): 2,000va 3,000va 4,000va voltage (breaking ) : 400vac 400vac 400vac make current: 16a 20a 25a material: agni 0.15 agcdo agcdo load/life type load life (ops.) rp410 12a, 250vac, cos ? = 1, 1200/h, 40% duty cycle 110,000 rp410 9.1a, 220vac, cos ? = 1, 360/h, 15% duty cycle 200,000 rp418 3.4a on, 0.42a off, 220vac, cos ? = 0.6 > 1.1 million rp411 8a, 250vac, cos ? = 1, 50% duty cycle 100,000 rp412 8a, 250vac, cos ? = 1, 50% duty cycle 100,000 rp330 18.2a, 250vac, cos ? = 1, 600/h, 15% duty cycle 110,000 rp330 96a on, 16a off, 250vac, cos ? = 0.6, 450/h >30,000 initial dielectric strength between open contacts: 1,000vrms between coil and contacts: 4,000vrms. creepage/clearance: 8/8mm. max. dc load breaking capacity rp ii/1 series 8-16 amp, 1 pole pc board relay file e214025 12a version only users should thoroughly review the technical data before selecting a product part number. it is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. coil data dc @ 20c nominal coil power: 500mw. contact life dc must nominal nominal resistance operate drop-out maximum coil voltage in voltage voltage voltage current vdc ohms vdc vdc vdc (ma) 5 54 10% 3.5 0.5 9.0 92.6 6 68 10% 4.2 0.6 10.8 88.2 12 270 10% 8.4 1.2 21.6 44.4 24 1,100 15% 16.8 2.4 43.2 21.8 48 4,400 15% 33.6 4.8 86.4 10.9 60 6,540 15% 42.0 6.0 108.0 9.2 110 23,100 15% 77.0 11.0 198.0 4.8 coil operating range applied coil voltage (u/un) nominal coil voltage (un)
485 schrack dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. catalog 1308242 issued 3-03 specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. 1.14 (29.0) .496 (12.6) 1.00 (25.5) .130 (3.3) typical part number b rp 4 1 0 012 1. basic series: rp = printed circuit board relay. 2. version: 3 = 16a, flux tight. 4 = 8/12a, flux-tight. 7 = 16a, sealed. 8 = 8/12a, sealed. 3. contact arrangement: 1 = 1 form c (spdt). 3 = 1 form a (spst-no). 4. contact material and pin spacing: 0 = silver-cadmium oxide, 16a or 12a, 5 mm pin spacing. 2 = silver-nickel 0.15, 8a, 3.5 mm pin spacing. 1 = silver-nickel 0.15, 8a, 5 mm pin spacing. 8 = silver-cadmium oxide, 12a, 3.5 mm pin spacing. 5. coil voltage: 005 = 5vdc 012 = 12vdc 048 = 48vdc 110 = 110vdc 006 = 6vdc 024 = 24vdc 060 = 60vdc ordering information outline dimensions pc board layouts (bottom views) none at present. our authorized distributors are more likely to maintain the following items in stock for immediate delivery. abdo2l2at2yods erau2l2raurc atpo epauc abut2 g2abbr 2sdva etap2 g2at c atpo epauc abdr erarc wiring diagrams (bottom views) abdo2l2at2yods erau2l2raurc atdc euabc abut2 g2abbr 2sdva etap2 g2at c atdc euabc abdr erarc 8/12a, 3.5 mm pin spacing 16a, 5 mm pin spacing 1 form c, 8/12a, 3.5 mm 1 form c, 8/12a, 5 mm mudbofompopot+ aemsofoems*l mprb armsl muspo jomuu* o+t6m apmro jomp l mprb armsl mud* aem*l 8/12a, 5 mm pin spacing 1 form a, 8/12a, 3.5 mm 1 form a, 8/12a, 5 mm 1 form a, 16a, 5 mm 1 form c, 16a, 5 mm
|
